![]() ![]() Furthermore, do not run any other applications. While updating the firmware, connect only a keyboard or mouse to the USB downstream ports.Before updating the firmware, set PC power saving modes such as standby, hibernate, or sleep to Off or to 10 minutes or longer.While it is possible to update the firmware with a single PA series display, take care not to disconnect the display power cable or USB/signal cable. Try a different cable to rule out the possibility of a faulty cable. If you have the same issue on another system, there’s something wrong with the monitor or cable. Connect your monitor to a different PC or a laptop. Therefore, we recommend that you use a notebook PC or prepare a second display to display the PC screen. Next, make sure this problem isn’t system-specific. If a problem occurs while the firmware is being updated, such as the power being switched off because the power cable was unplugged, PA/P Series displays can no longer display images but the firmware update can continue.Do not disconnect the display power cable or USB/signal cable while the firmware is being updated. To check if a Google Play system update is available, tap Updates Google Play system update. Check for an update: To check if a security update is available, tap Google Security Check-Up. If the display power cable or USB/signal cable is disconnected while the firmware is being updated, the firmware will not operate normally and no images will appear on the display. To check if an update is available: Open your devices Settings app.Read and understand the important points before updating the firmware. To move to ArcGIS Monitor 10.6, follow the instructions in the. ![]() The USB Firmware Update Tool updates the firmware of PA/P Series displays via USB. Upgrading from System Monitor 2.x or 1.x is not supported due to significant design changes. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |